DTM Intake for Your 16V
With the roller body intake EFI complete kit, you convert the M102 16V of your Mercedes 190E 2.3-16 or 2.5-16 Evo to a roller body intake and freely programmable fuel injection in one step. Instead of sourcing the intake, airbox, injection, ECU, wiring harness and triggers separately, you get everything matched to each other from a single source.
At its core is the roller body intake, a further development of the Mercedes Sport+Technik roller body intake from the 1990 DTM season, built by MRE. At part load, the engine can be controlled as precisely as with throttle valves, while at full load the rotating barrel opens the intake port completely, with no throttle shaft in the airflow. The intake runners are machined from aluminum and flow-optimized, so the system works just as well on a stock cylinder head as on an Evo 2 DTM engine with large intake ports.
Intake and Fuel Injection
The carbon airbox with carbon air filter housing and sports air filter supplies the intake with cool air. The fuel kit mounts eight Bosch injectors with two machined aluminum fuel rails directly on the intake, and the fuel pressure regulator is included. Throttle cable kit, throttle position sensor and vacuum system make the setup ready to connect to the engine management.
Engine Management, Ignition and Sensors
The MaxxECU Race takes control of fuel injection and ignition. The M102 16V engine wiring harness is built individually for your setup and comes with a relay and fuse box. Ignition is handled by four coil-on-plug ignition coils, while the crankshaft and camshaft trigger kits provide speed and phase detection. A wideband lambda sensor, knock sensor and coolant and intake air temperature sensors are also included, so your engine runs properly tuned and protected.
We are also happy to support you with the basemap, commissioning, tuning or installation, just get in touch.
A custom configuration with a lightweight flywheel including 60-2 trigger, a DTM camshaft trigger kit combined with more aggressive camshafts, as well as exhaust manifolds and performance exhaust systems is also possible.
Compatibility
- 190E 2.3-16 (W201)
- 190E 2.5-16 (W201)
- 190E 2.5-16 Evolution and Evo II (W201)
Notes
To install the roller body intake, the oil filter housing must be relocated, for example with the oil filter relocation adapter for the 190E 16V. With the carbon airbox, the smaller brake booster from the 190E 8V or diesel models must also be fitted.
Each unit is built individually to order. Returns are not possible.







Reviews
There are no reviews yet.